The answer depends on the exact glove model, pairs per carton, carton dimensions and approved loading arrangement.

For wholesale buyers, a container quotation should always identify the glove specification and packing configuration. The same glove packed into different cartons can produce different shipment quantities.

This guide uses published packing specifications from Zhanjiang Jiali Glove Products Co., Ltd., a Chinese glove manufacturer operating since 1998, to explain the calculations.

Why Container Loading Matters When Importing Gloves

Importers often compare factory quotations using a price per pair. However, international purchasing also requires attention to shipping efficiency, packaging costs and destination logistics.

Two quotations with similar prices per pair may have different landed costs if the export cartons, loading quantities or packaging requirements differ.

Before confirming an order, check four numbers:

• Pairs per carton
• Export-carton dimensions
• Total cartons per container
• Total pairs per shipment

You should also confirm gross carton weight, container payload restrictions, packaging specifications and the final loading plan.

Jiali JNI Green Nitrile Glove Carton Options

Jiali manufactures reusable green nitrile industrial gloves under its JNI series.

The published export-carton configurations include:

Calculated carton volumes are geometric measurements based on the outer dimensions. They are not guaranteed container-loading capacities.

The available loading data below applies specifically to the 144-pair JNI export carton.

How Many JNI Gloves Fit in a 20GP Container?

Jiali’s published factory reference loading for the JNI 144-pair carton is:

The calculation is:

1,050 cartons × 144 pairs = 151,200 pairs

This figure is associated with the specified 37.2 × 28.2 × 25.2 cm export carton.

The total nominal outer-carton volume is approximately 27.76 m³. Actual loading depends on the packing arrangement and available container space.

How Many JNI Gloves Fit in a 40HQ Container?

For the same 144-pair JNI carton, Jiali’s published factory reference is:

The calculation is:

2,500 cartons × 144 pairs = 360,000 pairs

The total nominal outer-carton volume is approximately 66.09 m³.

These quantities describe the published factory reference arrangement. Final loading should be confirmed for the actual order, including carton weights, loading method and applicable transport restrictions.

Can You Use the Same Loading Figures for 240-Pair or 300-Pair Cartons?

No.

A different packing configuration changes the outer carton dimensions and potentially the shipment arrangement.

For example, Jiali’s 240-pair carton is larger than the 144-pair carton. Its volume cannot be ignored simply because more gloves fit inside each box.

Likewise, a 300-pair carton requires its own loading calculation.

The following approach would be incorrect:

• Take the 1,050-carton 20GP quantity for the 144-pair configuration.
• Multiply it by 300 pairs.
• Claim the result as a verified 300-pair carton loading quantity.

That calculation assumes the larger carton can be loaded in the same number, which has not been established.

For 240-pair and 300-pair cartons, buyers should request a revised factory loading plan before confirming order quantities.

How to Calculate Export Carton Volume

Carton volume is calculated using:

Length × Width × Height

Convert all dimensions to meters first.

For example, the JNI 144-pair carton measures:

• Length: 0.372 m
• Width: 0.282 m
• Height: 0.252 m

Therefore:

0.372 × 0.282 × 0.252 = 0.026435808 m³

This is approximately 0.02644 cubic meters per carton.

The formula is useful for initial freight planning, but it does not account for every loading constraint. Pallets, stacking patterns, weight distribution, clearance and container dimensions may affect the practical result.

What About JLHL Household Latex Gloves?

Jiali also manufactures reusable household latex gloves under the JLHL series.

These models cover different weights, lining constructions, lengths and packing arrangements.

The published standard household glove packaging includes:

• 1 pair per polybag
• 12 pairs per pack
• 240 pairs per export carton

However, container loading varies by the selected JLHL model.

For example, Jiali publishes different 20GP loading quantities for JLHL-DF-23, JLHL-35G, JLHL-50G and JLHL-65G.

Buyers should use the loading figure corresponding to the selected model rather than applying one universal quantity to all household latex gloves.

Visit our JLHL Household Latex Gloves product page for the published model-specific data.

How Packaging Changes the Final Shipment

Private-label buyers may request printed polybags, different outer cartons or other retail packaging modifications.

These changes can affect:

• Units per carton
• Carton dimensions
• Carton gross weight
• Container loading arrangement
• Freight cost per pair
• Warehouse handling requirements

Confirm the packaging specification before comparing landed costs.

For a detailed packaging preparation checklist, read OEM Glove Packaging Checklist.

Information to Request Before Confirming a Glove Shipment

A practical bulk purchasing inquiry should contain:

1. Exact glove model and size breakdown
2. Pair quantity or target container quantity
3. Packing option and retail packaging requirements
4. Carton dimensions and gross weight
5. Required shipping marks
6. Intended destination port
7. Preferred shipping terms
8. Product and export documentation requirements

Ask your supplier to confirm the final packing list and loading plan for the approved order.

Frequently Asked Questions

Is a 40HQ container always the best option for glove imports?

Not necessarily. Buyers should compare order size, freight rates, destination costs, warehouse requirements and the actual loading plan.

Can different glove models be loaded in one container?

Mixed-model shipments may be discussed with the manufacturer, but the total quantity and layout must be calculated for the actual carton mix.

Is carton volume enough to calculate an accurate container quantity?

No. Carton volume is useful for planning, but loading must also account for dimensions, stacking, weights, packaging and other practical constraints.

Do the JNI 144-pair loading figures apply to all green nitrile gloves?

No. They refer to Jiali’s published JNI 144-pair export carton configuration and should not be applied automatically to other packing options or manufacturers.

Plan Your Wholesale Glove Shipment with Jiali

Zhanjiang Jiali Glove Products Co., Ltd. manufactures reusable household latex gloves and industrial nitrile gloves for overseas importers, distributors and private-label brands.

For bulk purchasing, we recommend confirming the product model, approved packaging and container loading before finalizing the commercial quotation.

Explore our JNI Reusable Green Nitrile Gloves Manufacturer page or contact our team with your shipping requirements.

Request a Wholesale Glove Quotation

For Category III personal protective equipment (PPE) intended for the EU market, buyers need to verify the glove model, the applicable EU type-examination certificate, the relevant technical markings and the additional conformity assessment procedure required by Regulation (EU) 2016/425.

This guide explains the main checks using Jiali JNI reusable green nitrile industrial gloves as a practical product example.

What Does CE Category III Mean for Protective Gloves?

Category III PPE covers certain risks that may cause very serious consequences, including death or irreversible damage to health.

Under Regulation (EU) 2016/425, Category III conformity assessment includes:

• Module B: EU type-examination by a notified body.
• Module C2 or Module D: An additional procedure covering conformity to type under the applicable production-supervision system.

A Module B certificate is therefore an important document, but buyers should not assume that Module B alone completes all Category III requirements.

For the legal requirements, see Regulation (EU) 2016/425 on EUR-Lex.

Step 1: Check the Certificate Against the Exact Glove Model

Start with the product identity rather than the certificate logo.

Confirm:

• Manufacturer’s legal name
• Glove model or product reference
• Material and construction
• Certificate number
• Notified body
• Issue and expiry information
• Applicable standards and certificate scope

Jiali manufactures the JNI series of reusable green nitrile industrial gloves in Zhanjiang, Guangdong, China.

Its published EU type-examination documentation identifies the following:

The certificate applies to its documented product scope. It must not be presented as certification of every industrial, household or disposable glove manufactured by Jiali.

Buyers should request the applicable certificate and verify the exact model and current status before relying on the documentation.

Step 2: Understand EN ISO 374-1 Type A

EN ISO 374-1 concerns protective gloves against dangerous chemicals.

Type A indicates that the glove achieved the specified permeation performance against at least six defined test chemicals under standardized laboratory conditions.

The JNI certificate documentation identifies:

EN ISO 374-1: Type A — JKLMOPT

These letters identify the chemicals for which the documented test performance applies. They are not a blanket guarantee against all chemicals or mixtures.

When selecting industrial gloves, buyers should assess:

• Exact chemical name and concentration
• Expected contact type and duration
• Temperature and working conditions
• Relevant breakthrough and degradation data
• Intended task and glove-use instructions

Important: A laboratory permeation result does not establish a universally safe wearing time in every workplace.

Step 3: Read the EN 388 Mechanical Performance Marking

EN 388 describes specified mechanical performance tests for protective gloves.

Jiali JNI documentation lists:

EN 388: 4101X

The positions in this marking correspond to different mechanical performance test results. The X in the marking means the applicable test result is not available or not applicable as defined by the standard.

Do not interpret the overall code as a single quality score. A glove may perform differently under abrasion, cutting, tearing and puncture-related test conditions.

Procurement teams should compare the actual marking and supporting test information with the hazards of their work.

Step 4: Do Not Confuse Microorganism Protection with Virus Claims

Jiali JNI documentation also lists EN ISO 374-5 for microorganism protection.

This reference should not automatically be rewritten as “virus resistant.”

Claims relating to protection against viruses require the applicable additional evidence and marking.

If the supplied document refers to microorganisms without a supported virus claim, the product description should remain limited to the documented scope.

Step 5: Understand What EN 421 Does and Does Not Mean

EN 421 addresses protective gloves for specified ionizing-radiation and radioactive-contamination hazards, depending on the applicable requirements.

For Jiali JNI, the documented application must be interpreted within the relevant certificate scope.

EN 421 is not an antistatic glove standard.

It should not be used to advertise ESD or electrostatic-dissipation performance without appropriate separate evidence.

Step 6: Check the Actual JNI Construction

Protective performance documentation must correspond to the actual glove construction.

Jiali’s JNI published commercial specifications include:

• Synthetic nitrile rubber
• Green exterior
• Nominal palm thickness: 15 mil, approximately 0.381 mm
• Length: 330 ± 10 mm
• Sizes: 7/S through 11/XXL
• Flock-effect interior construction

The product’s technical file describes the interior as White Polyester Nap Backing. This should not be represented as a traditional cotton flock lining or an unlined glove.

Commercial nominal palm thickness and thickness measurements at other test locations must not be treated as interchangeable.

For model details, visit our JNI Green Nitrile Industrial Gloves product page.

Step 7: Request the Complete Documentation Package

Before purchasing industrial gloves for an EU PPE application, ask the supplier for the documents relevant to the exact product and destination market.

Depending on the product and applicable requirements, this may include:

1. EU type-examination certificate
2. EU Declaration of Conformity
3. Applicable Module C2 or Module D conformity assessment information
4. Instructions for use
5. Technical product specification
6. Relevant performance documentation
7. Product labeling and traceability information

Verify the consistency of product names, markings, certificate references and manufacturer details.

A certificate number printed on a quotation is not a substitute for reviewing the actual documents.

Jiali publishes the reference information for its applicable products on the Certifications & Compliance page.

Frequently Asked Questions

Does a Module B certificate alone complete Category III CE conformity assessment?

No. Category III PPE requires Module B together with the applicable Module C2 or Module D procedure under Regulation (EU) 2016/425.

Does EN ISO 374-1 Type A mean protection against every chemical?

No. The marking relates to performance against specified test chemicals under defined conditions. Chemical compatibility must be assessed for the actual work.

Is an EN ISO 374-5 microorganism claim the same as a virus-protection claim?

No. Virus-related claims require their own applicable supporting evidence and marking.

Can the JNI certificate be used for Jiali household latex gloves?

No. JNI and JLHL are different glove series with separate product documentation and certificate scopes.

Request JNI Specifications and Product Documents

Zhanjiang Jiali Glove Products Co., Ltd. manufactures reusable green nitrile gloves for industrial and professional cleaning buyers whose applications match the selected glove’s documented performance.

If you are sourcing JNI gloves, provide the destination market, intended use, expected quantity and required documentation.

Our team can help identify the applicable product specification and documentation for your inquiry.

Contact Jiali Gloves

Explore our Reusable Green Nitrile Gloves Manufacturer page for JNI OEM and wholesale information.

A 23g household latex glove and a 65g glove may serve different market segments, even when both are described as reusable dishwashing gloves.

This guide uses actual product specifications from Jiali Gloves to explain how buyers can make informed sourcing decisions.

What Should You Check When Buying Wholesale Dishwashing Gloves?

The short answer: Compare the glove material, weight per pair, palm thickness, lining, length, grip texture, retail packaging and confirmed container loading.

For reusable household cleaning, natural rubber latex gloves are one available option because of their flexibility and comfortable fit.

However, the best product depends on the intended application, local market preferences and customer requirements. Buyers should also consider natural latex allergy concerns and verify chemical compatibility where relevant.

Before evaluating quotations, it is useful to prepare a written product specification.

1. Compare Glove Specifications, Not Just Price

Different glove weights and thicknesses can influence product feel, material consumption and retail positioning.

Jiali Gloves manufactures reusable household latex gloves under the JLHL series, with several specifications for different market needs.

The following table shows four selected models.

Jiali Household Latex Glove Specifications

Source: Jiali Gloves Product Specification Sheet, February 19, 2025. Weights refer to Medium size. Loading quantities refer to the published standard configurations and may change with customized packaging.

These specifications represent different purchasing options rather than a universal ranking of glove quality.

A lightweight glove may fit one retail program, while a heavier glove may be preferred in another.

Lightweight Options

The JLHL-DF-23 model weighs 23g per pair in Medium size and has a 5.5 mil palm thickness.

It can be considered for price-sensitive household cleaning programs where a lighter construction is preferred.

Its published standard 20GP loading quantity is 324,000 pairs.

Cotton Flock-Lined Options

The JLHL-35G model weighs 35g per pair and features an 8 mil palm thickness.

The JLHL-50G and JLHL-65G models offer heavier constructions with thicker palms.

Importers should compare approved samples for flexibility, fit, grip and comfort before deciding which model is suitable for their market.

For a more detailed explanation of inner finishes, read our Flock-Lined vs Unlined Latex Gloves Buying Guide.

2. Why Packaging Matters for Wholesale Buyers

For supermarket chains, household cleaning brands and distributors, packaging is part of the purchasing decision.

A glove with the right specifications may still require different packaging to match the destination market.

Jiali’s published standard household glove packaging includes:

For private-label orders, importers may need to confirm retail artwork, brand colors, product labels, barcodes, size identification and carton markings.

Custom packaging should be reviewed before the final quotation because it may affect carton dimensions, packing costs and container loading.

Buyers can use our OEM Glove Packaging Checklist to prepare their packaging requirements.

3. How Does Container Loading Affect Landed Cost?

Container loading is especially important for bulk glove purchases.

The quoted price per pair is only one part of the total import cost. Buyers also need to consider international freight, customs charges, local delivery and other applicable costs.

For example, Jiali’s published standard 20GP loading quantities include:

• JLHL-DF-23: 324,000 pairs
• JLHL-35G: 240,000 pairs
• JLHL-50G: 192,000 pairs
• JLHL-65G: 156,000 pairs

These quantities differ because each model has its own specifications and packing requirements.

Importers should avoid assuming that every household latex glove can be loaded in the same quantity.

For a more useful quotation comparison, ask each supplier to confirm the product specification, export carton configuration, loading quantity and agreed trade terms.

A practical purchasing principle: Compare the total landed cost of equivalent specifications, not only the factory price per pair.

4. What Should Importers Confirm Before Approving an Order?

A written specification helps avoid misunderstandings between buyers and manufacturers.

Before confirming a bulk order, check the following information:

Sample approval is another important step.

The buyer and manufacturer should confirm the reference sample and written specification before mass production.

For applications involving particular chemicals or regulatory requirements, buyers should request relevant product-specific testing or documentation rather than relying on glove thickness alone.

5. Why Work Directly with a Household Latex Glove Manufacturer?

Working directly with a manufacturer can help buyers discuss product specifications, sample development, packaging details and production planning.

Established in 1998, Zhanjiang Jiali Glove Products Co., Ltd. manufactures reusable household latex gloves and industrial protective gloves for international markets.

For importers and private-label buyers, direct communication with the factory helps clarify technical requirements before an order is placed.

Explore the Jiali Household Latex Gloves product range for additional specifications and model information.

Frequently Asked Questions

What is the best weight for wholesale dishwashing gloves?

There is no single best weight for every market. Buyers should select a glove based on the intended cleaning task, customer preferences, flexibility, comfort and target price.

How many pairs of 23g household latex gloves fit in a 20GP container?

Jiali’s JLHL-DF-23 model has a published standard loading quantity of 324,000 pairs per 20GP container, based on the specified packing configuration.

Are thicker household gloves always better?

Not necessarily. A thicker glove may offer a more substantial construction, but suitability also depends on fit, flexibility, grip, manufacturing quality and the intended application.

Can Jiali supply private-label dishwashing gloves?

Jiali supports OEM and private-label glove projects. Buyers should confirm artwork, packaging specifications, quantities and other customization requirements before placing an order.

What information should I send when requesting a wholesale quotation?

Provide your destination market, preferred glove model or target weight, size range, color, packaging requirements, estimated quantity and delivery expectations.

Conclusion

Choosing wholesale dishwashing gloves is not simply about finding the lowest price.

The right sourcing decision should consider product specifications, approved samples, packaging, container loading and overall purchasing requirements.

With clear factory data and a confirmed product specification, importers can compare quotations more effectively and select gloves that match their market needs.

Looking for a reusable household latex glove supplier in China?

Contact Jiali Gloves with your requirements to discuss suitable JLHL models, packaging options and wholesale orders.

Jiali manufactures household latex gloves and industrial latex and nitrile gloves for wholesale and private-label orders. This guide helps importers prepare a specification and request the documents for the exact model they plan to buy.

What is the difference between nitrile and latex reusable gloves?

Natural latex gloves use natural rubber latex. Nitrile gloves use synthetic nitrile rubber. Material affects the starting point for selection, but the finished glove also depends on its formulation, thickness, length, lining and surface finish. Compare actual product specifications rather than assuming that every glove made from the same material performs alike.

Which material should household-glove buyers compare first?

For a household-cleaning range, start with the cleaning task and the experience expected by the end user. Compare fit, grip, cuff length, lining, ease of putting the glove on and care instructions. Jiali’s natural latex household range includes flock-lined and dipped-lined models. Confirm the size mix, weight and packing for each model before comparing prices.

If the main question is about the inner lining, use our separate flock-lined vs unlined latex glove guide. Lining choice and material choice are separate decisions.

How should industrial buyers assess chemical-related requirements?

Provide the substances involved, their concentrations, temperature, contact duration and whether exposure involves splashes or immersion. Ask for the selected model’s relevant permeation, breakthrough and degradation information. A material name or a general description such as “chemical resistant” does not establish suitability for a particular task.

This approach follows HSE guidance on choosing protective gloves, which recommends using the correct manufacturer’s performance data. OSHA’s glove-selection guidance also explains that no glove protects against every potential hand hazard.

Review the specifications for our green nitrile industrial gloves and request the documentation applicable to the exact product and intended market. The responsible buyer or workplace safety team should evaluate the proposed glove against the task before approval.

What should a wholesale comparison include?

1. Application: the working task and destination market.
2. Product: model, material, lining, size mix, length, weight or thickness, colour and grip.
3. Evidence: the specification sheet, relevant test reports and applicable product documents.
4. Packaging: pairs or pieces per pack, packs per carton, artwork and carton marks.
5. Commercial terms: quantity, samples, production schedule, port and quotation basis.

Compare quotations using the same units and specification. A price per pair, per piece and per carton cannot be compared until the packing quantity is clear. Confirm the MOQ and container loading for the selected specification in the written quotation.

Can Jiali supply both materials with private-label packaging?

Yes. Jiali supports private-label latex and nitrile glove projects. Available options depend on the selected model and order requirements. Send the application, material, size mix, lining, dimensions, quantity, packaging and destination to request a factory quotation.

For household cleaning, dishwashing, janitorial work and supermarket retail programs, two common options are flock-lined latex gloves and unlined latex gloves. Both can be made from natural rubber latex, but they feel different in use and are suitable for different buyer requirements.

At Jiali Gloves, our household latex gloves include cotton flock-lined and dipped-lined options for importers, distributors and private-label household cleaning brands. This guide explains how buyers should compare flock-lined and unlined latex gloves before placing a bulk order.

What Are Flock-Lined Latex Gloves？

Flock-lined latex gloves have a soft inner lining, usually made with cotton flock. The lining creates a more comfortable layer between the hand and the latex surface.

For household cleaning gloves, cotton flock lining is commonly used because it helps make the glove easier to wear, especially during longer cleaning tasks. It also helps absorb moisture from the hand, which can improve comfort during dishwashing, bathroom cleaning, kitchen cleaning or general household chores.

Jiali’s standard cotton flock-lined household latex glove series includes JLHL-35G, JLHL-40G, JLHL-45G, JLHL-50G, JLHL-55G, JLHL-60G and JLHL-65G models. These models are designed for different price levels, durability requirements and cleaning applications.

What Are Unlined Latex Gloves?

Unlined latex gloves do not have a cotton flock layer inside. The inner surface is smoother and more direct. Some buyers choose unlined gloves when they want a simpler structure, faster drying, or a specific industrial or cleaning use where flock lining is not required.

Unlined gloves can be useful in some applications, but for household cleaning and retail dishwashing gloves, many buyers prefer flock-lined options because comfort and easy wearing are important to the end user.

If a buyer is sourcing for a supermarket, household goods brand, cleaning product distributor or general consumer retail channel, flock-lined latex gloves are often the more practical starting point.

Flock-Lined vs Unlined Latex Gloves: Key Differences

Flock-lined latex gloves have an inner flock layer; unlined latex gloves do not. Compare the lining together with fit, weight, thickness and intended use. Jiali’s dipped-lined models are listed separately in the specification table below and should not be treated as identical to unlined gloves. Confirm the exact construction on the selected model’s specification sheet.

Which Type Is Better for Dishwashing?

For dishwashing gloves, flock-lined latex gloves are usually the better option for retail and household use.

Dishwashing involves water, detergent and repeated hand movement. Consumers often wear the gloves for several minutes or longer. A cotton flock lining can make the glove feel softer and more comfortable, especially when the buyer wants a product for supermarkets, household cleaning brands or repeat retail sales.

Jiali’s household latex glove range includes medium-weight and heavy-weight flock-lined models suitable for dishwashing and cleaning programs. For example, JLHL-35G and JLHL-40G can be considered for lighter household use, while JLHL-50G, JLHL-55G, JLHL-60G and JLHL-65G are more suitable when the buyer needs a stronger glove feel.

Which Type Is Better for Cleaning Companies?

Cleaning companies may need gloves for dishwashing, room cleaning, bathroom cleaning, wet cleaning and general janitorial work. In this case, the best choice depends on durability, comfort and cost.

For daily cleaning work, flock-lined latex gloves are a strong option because workers may wear gloves for repeated tasks during the day. A softer inner lining improves comfort and helps reduce the uncomfortable feeling of sweaty hands.

For heavier cleaning work, buyers should also compare glove weight and thickness, not only lining type. Jiali’s cotton flock-lined household latex glove models range from JLHL-35G to JLHL-65G, with palm thickness from 8.0 mil to 15.0 mil depending on model. The heavier models are better suited for more demanding cleaning jobs.

How Jiali’s Household Latex Glove Range Compares

Use the model table below to compare specifications. For example, JLHL-35G is listed at 35 g and 8.0 mil, JLHL-40G at 40 g and 10.0 mil, and JLHL-50G at 50 g and 12.0 mil. These are the published M-size weights and palm thicknesses; confirm the required sizes, tolerances, packing and current specification before ordering.

Jiali’s household latex glove series is designed for B2B buyers who need clear specifications for wholesale orders.

The standard packaging is 1 pair per polybag, 12 pairs per pack and 240 pairs per carton. The standard MOQ is 1 × 20GP container per specification.

How Should Importers Choose?

For most household cleaning glove importers, the best choice starts with the target market.

If your customer is a supermarket, household retail brand or cleaning product distributor, cotton flock-lined latex gloves are usually easier to position because they offer a good balance of comfort, durability and retail appeal.

If your customer is highly price-sensitive, a lighter model such as JLHL-DF-23, JLHL-35G or JLHL-40G may be suitable, depending on the required glove feel and cleaning application.

If your customer needs a stronger glove for heavier cleaning, commercial cleaning or long-use household chores, JLHL-50G to JLHL-65G models may be more suitable.

What Buyers Should Confirm Before Ordering

Before placing a bulk order, buyers should confirm:

1. Lining type: cotton flock-lined, dipped-lined or other structure.
2. Glove weight: for example, 23g, 35g, 40g, 50g, 60g or 65g.
3. Length: usually 29–30 cm or 30–32 cm in Jiali’s household range.
4. Palm thickness: from 5.5 mil to 15.0 mil depending on model.
5. Size range: S, M, L and XL requirements.
6. Color: standard or custom color.
7. Packaging: polybag, header card, inner pack, master carton and private-label artwork.
8. MOQ and container loading: usually 1 × 20GP container per specification.

For custom packaging, carton marking and buyer-specific retail programs, Jiali provides OEM/ODM private-label support for importers and distributors.

FAQ

Are flock-lined latex gloves better for household cleaning?

For most household cleaning and dishwashing applications, flock-lined latex gloves are a practical choice because they are more comfortable for repeated use and easier for consumers to wear.

Are unlined latex gloves cheaper?

Unlined gloves may be more cost-efficient in some specifications, but the final price depends on material, weight, thickness, color, production process, packaging and order quantity.

Which Jiali model is suitable for light dishwashing?

For lighter household use, buyers can consider JLHL-DF-23, JLHL-35G or JLHL-40G, depending on the required glove feel, target price and market positioning.

Which Jiali model is suitable for heavier cleaning?

For stronger household or commercial cleaning applications, JLHL-50G, JLHL-55G, JLHL-60G and JLHL-65G provide heavier gram weight and greater palm thickness.

Can Jiali support private-label packaging?

Yes. Jiali supports OEM and private-label packaging, including polybags, printed packaging, carton markings and buyer-specific packaging requirements.

Conclusion

Flock-lined and unlined latex gloves both have their place, but for household cleaning, dishwashing, supermarket retail and cleaning product distribution, flock-lined latex gloves are often the better starting point. They offer better comfort, easier wearing and a stronger retail experience.

For bulk buyers, the best glove is not only about lining. It should be selected together with weight, thickness, length, packaging and container loading. Jiali Gloves manufactures household latex gloves from its own factory in Zhanjiang, China, with multiple cotton flock-lined and dipped-lined models available for OEM and wholesale orders.

To choose the right model for your market, contact Jiali Gloves with your target weight, size range, color, packaging format and destination market.

This checklist helps buyers prepare a practical packaging brief for latex household gloves, industrial gloves and applicable disposable examination glove projects.

1. Start with the glove specification

Packaging should match the product you are buying. Confirm the glove material, application, size range, colour, length, weight or thickness, cuff style and finish before finalising the pack. A household glove sold in pairs may need a different retail format from an examination glove supplied in a dispenser box.

For a custom project, include the exact product name and the market where it will be sold. This helps the factory check whether the wording, language and product claims on the packaging are suitable for the intended application.

2. Choose the unit packaging format

Common OEM glove packaging options include:

• Polybag: a practical option for household or industrial gloves sold in pairs or small sets.
• Printed header card: used when the buyer wants the glove and branding visible at retail.
• Dispenser box: commonly used for applicable disposable glove projects where controlled dispensing and clear size identification are required.
• Pouch or retail carton: suitable for private-label retail programmes that need stronger shelf presentation.

State the number of gloves or pairs per unit, the required language, whether a barcode is needed and whether the pack should include care, storage or usage information.

Example: Jiali Household Latex Glove Packaging

For Jiali’s JLHL reusable household latex glove series, the published standard packing configuration is:

• Individual packaging: 1 pair per polybag.
• Pack quantity: 12 pairs per pack.
• Export carton: 240 pairs per carton.

Container loading depends on the selected glove model, weight and standard packing configuration.

For example, the JLHL-DF-23 dipped-lined household latex glove (23g per pair, Medium size) has a published standard loading quantity of 324,000 pairs per 20GP container. The JLHL-35G cotton flock-lined model (35g per pair, Medium size) has a published standard loading quantity of 240,000 pairs per 20GP container.

These figures are based on Jiali’s published standard product specifications. Customized retail packaging, carton dimensions or packing arrangements may affect the final container loading quantity. Buyers should confirm the loading plan for the selected model and packaging before placing a bulk order.

For detailed model specifications, including glove weight, palm thickness, length and container loading, see our JLHL Household Latex Glove Specification Table.

3. Specify the master carton requirements

Outer cartons are part of export preparation, not an afterthought. Buyers should confirm the number of inner packs per carton, carton marking, gross-weight limit, destination marks, barcode placement and any palletisation requirement.

If several sizes or colours will be loaded together, ask for a packing breakdown before production. This makes warehouse receiving, retail allocation and container planning easier for both sides.

4. Prepare artwork that a factory can use

Send editable artwork whenever possible, together with a clear version of your logo, colour references, barcode data and the required copy for each panel. Do not rely on a low-resolution screenshot as final artwork.

Before approval, check the following items carefully:

• Brand name and product name
• Size and colour identification
• Country-of-origin wording where required
• Barcode number and barcode placement
• Warnings, care instructions and storage information
• Only product claims supported by the applicable documentation

5. Keep certification wording product-specific

Do not place broad certification logos or claims on packaging without checking the exact product scope. A quality-management certificate, a social audit and a product conformity document do not mean the same thing. For example, FDA 510(k) clearance applies only to the applicable patient examination glove product, not automatically to every glove in a catalogue.

Ask the factory for the product-specific documentation that applies to your order and have your own compliance team or importer review the final packaging copy before printing.

6. Approve a pre-production sample

Before mass production, approve both the glove sample and the packaging sample. A useful approval record includes the product specification, approved artwork version, sample photos, carton marking and the date of approval.

This step reduces avoidable mistakes such as a wrong size label, an outdated barcode, a different colour reference or carton marks that do not match the destination market.

7. What to send when requesting an OEM quotation

To receive a useful factory quotation, send the product type, intended application, target market, preferred packing format, estimated order quantity and any available artwork. If you do not yet have final artwork, a reference photo and a list of required information are enough to start the discussion.

Jiali Gloves supports OEM and private-label projects for latex and nitrile glove buyers. Learn more about our OEM and private-label glove service, explore our latex and nitrile glove range, or contact our team with your packaging brief.

Frequently Asked Questions

Can I use my own logo and artwork on glove packaging?

Yes. For an OEM project, buyers can provide their own logo, artwork, barcode and packaging requirements for factory review and sample approval.

What packaging should I choose for disposable gloves?

The correct format depends on the product and target market. A dispenser box is common for applicable disposable glove projects, while other formats may be more suitable for industrial or household products.

Should I approve packaging before production starts?

Yes. Approving a pre-production glove and packaging sample helps prevent artwork, labelling and carton-marking errors before mass production.

Visit Zhanjiang Jiali Glove Products Co., Ltd. in Phase 1 or Phase 2 to discuss glove specifications, OEM packaging, sampling, quality documentation and export cooperation. We have manufactured latex and nitrile gloves since 1998 and support buyers with factory-direct sourcing from Zhanjiang, Guangdong.

Where to Meet Jiali Gloves at the 140th Canton Fair

Venue: China Import and Export Fair Complex, Guangzhou, China.

What Buyers Can Discuss with Our Team

Our two booths allow buyers to discuss different glove applications and sourcing requirements with the Jiali Gloves team.

• Phase 1, Booth 11.1E26: industrial protection gloves, heavy-duty latex gloves, nitrile industrial gloves and application-specific glove requirements.
• Phase 2, Booth 14.4D31: latex household gloves, cleaning gloves, private-label retail packaging and wholesale bulk supply projects.
• OEM and private label: glove material, colour, weight, length, cuff style, surface finish, logo printing, dispenser boxes, polybags and master-carton labelling.
• Factory cooperation: product specifications, pre-production samples, MOQ, quality control, export documentation and quotation requirements.

Bring Your Glove Sourcing Brief

To make the meeting more productive, buyers are welcome to bring a target specification, reference sample or packaging artwork. Our team can discuss the intended market, glove application, size range, packaging format and purchasing volume.

For private-label projects, useful information includes your target product type, preferred glove material, thickness or weight, colour, packaging requirements, destination market and expected order quantity. This helps us recommend a practical specification and prepare an accurate factory quotation.

Direct Glove Manufacturing for Overseas Buyers

Jiali Gloves is a glove manufacturer based in Zhanjiang, Guangdong, China. We supply latex and nitrile glove solutions for household cleaning, industrial protection and examination applications. Our team supports OEM and private-label buyers from product development through packaging, quality control and export preparation.

Learn more about our OEM and private-label glove service, review our quality system, or explore our latex and nitrile glove range.

Schedule a Meeting with Jiali Gloves

If you plan to attend the 140th Canton Fair, visit us at Booth 11.1E26 during Phase 1 or Booth 14.4D31 during Phase 2. If you cannot attend in person, send us your glove specification and target market for product recommendations, samples and a factory quotation.

Contact Jiali Gloves to arrange a meeting or discuss your OEM glove project.

Frequently Asked Questions

Which Canton Fair booths did Jiali Gloves attend?

Jiali Gloves exhibited at Booth 11.1E26 in Phase 1 and Booth 14.4D31 in Phase 2 of the 140th Canton Fair.

Can I discuss private-label glove packaging at the fair?

Yes. Buyers can discuss custom colours, logo printing, dispenser boxes, polybags, barcodes, carton labelling and other OEM packaging requirements with our team.

What if I cannot attend the Canton Fair?

Contact Jiali Gloves online with your target market, product specification and expected order quantity. Our team can provide product information, sample arrangements and a quotation.

When sourcing latex household gloves from China, buyers often start with a “top manufacturers” list. Many lists repeat marketing claims without showing where the information came from.

This page takes a different approach. It compares publicly stated information from supplier websites and identifiable company profiles, with a source link for each profile. Where a company does not publicly disclose a founding year, certificate number or production detail, it is marked as not publicly identified rather than estimated.

Disclosure: This page is published by Jiali Gloves and includes Jiali in the comparison. It is not an independent certification, ranking or endorsement. Buyers should reconfirm current specifications, capacity and compliance documents directly with each supplier before ordering.

Jiali Gloves (Zhanjiang Jiali Glove Products Co., Ltd.)

• Founded: 1998
• Location: Zhanjiang, Guangdong, China
• Product focus: Latex household gloves, industrial latex gloves, nitrile gloves and disposable examination gloves
• Public compliance information: CE Category II documentation for the JLHL latex household glove series, issued by CTC France, Notified Body 0075, Certificate No. 0075/2236/162/04/21/0798, valid through 3 May 2031. The company product page also cites TÜV SÜD REACH Report No. 7216010276.
• Company-stated production: 9 automated dipping lines and 180M+ pairs annual output
• Company-stated market coverage: Published sea-freight lanes cover Europe, North America, the Middle East and Southeast Asia (see our shipping policy). We previously stated "100+ countries" here; that figure had no source, so we have removed the number rather than keep an unsourced one.

Sources reviewed: Latex Household Gloves product page and Certifications & Compliance.

Jiali Gloves supports OEM and private-label projects, including custom colours, glove specifications, polybags, dispenser boxes and export-carton markings. Buyers can review the OEM and private-label process before requesting a quotation.

Wuxi Fangqian Plastic Working Glove Co., Ltd.

• Founded: Not publicly stated on the source reviewed; the company states 20+ years of glove-industry experience
• Location: Wuxi, Jiangsu, China
• Product focus: Latex household gloves and dipped working gloves
• Public product information: Dipped and spray-flocklined household gloves, with stated weight options including 35g, 45g, 55g and 60g
• Public compliance information: The company product page states EN 388, EN 420 and REACH compliance; public certificate numbers were not identified on the source reviewed
• OEM: Private-label and customised packaging are stated as available

Source reviewed: Wuxi Fangqian latex household glove page.

Guangzhou Red Sunshine Co., Ltd.

• Founded: The company website states more than 20 years of glove manufacturing and export experience; an exact founding year was not confirmed on the source reviewed
• Location: The company website describes an original factory in Foshan, Guangdong, with additional production bases in Guangxi and Hebei
• Product focus: Latex household gloves, industrial latex gloves, nitrile household gloves, nitrile industrial gloves and PVC gloves
• Company-stated production: 3 production bases, 12 automated production lines and 300,000+ pairs daily output
• OEM: The company states that it supports OEM and private-label packaging
• Public certificate numbers: Not identified on the source reviewed; buyers should request product-specific documents directly

Source reviewed: Guangzhou Red Sunshine company website.

Sunny Bryant Industrial Limited

• Manufacturing roots: The company website traces its glove-manufacturing history to 1986
• Location: Yangjiang, Guangdong, China
• Product focus: Household, industrial, food-processing and heavy-duty latex glove ranges
• Public product information: The company describes diamond-palm household rubber gloves, industrial latex gloves and gloves for fish and food processing
• Public certificate numbers: Not identified on the company source reviewed; buyers should request current product-specific documents directly

Source reviewed: Sunny Bryant company history.

How buyers should use these supplier profiles

Use these profiles as a shortlist, not as a ranking. Each company above is a real manufacturer or supplier with a verifiable presence, but the right choice depends on the buyer’s market, certificate scope and order size rather than on position in a list. Work through four questions in order: does the certificate name the exact model and material being bought, does the factory quote a gram weight and thickness tolerance in writing, does the packing format match the destination channel, and can the supplier produce a product-specific test report rather than only a company-level ISO certificate. A supplier who answers all four with documents is usually a safer choice than one with a longer client list. Ask each candidate for the same document pack and compare like for like; samples from two or three shortlisted factories settle more questions than any amount of profile reading.

This is not a ranking of “best” manufacturers. A supplier may be suitable or unsuitable depending on the target market, glove type, order quantity, packaging requirements and required documents.

Before requesting a quotation, buyers should confirm the following in writing:

1. Whether a compliance document applies to the exact glove model and intended market
2. The certificate number, issuer, product scope and current validity date
3. The MOQ, packaging format and container loading for the selected specification
4. Whether a stated production-capacity figure applies to the relevant product line
5. Sample approval, production lead time and inspection requirements

Need a private-label latex household glove quotation?

Jiali Gloves manufactures latex household gloves for importers, distributors and private-label brands. Share your target market, glove specification, packaging requirements and estimated order volume to discuss a suitable OEM proposal.

Request a factory quotation from Jiali Gloves or chat with Jiali Gloves on WhatsApp.

1. Match Specifications to Your Use Case

Different applications need different weights and linings. Before requesting a quote, confirm the intended use (kitchen dishwashing, bathroom sanitization, food prep, gardening), then ask the supplier to map it to specific model codes and numbers — not adjectives.

A complete spec answer looks like this:

If a supplier can’t produce a table like this, that’s a gap worth noting.

2. Ask for Certificate Numbers, Not Just Claims

“CE certified” without a certificate number tells you less than a supplier who provides the notified body, certificate number, and expiry date. Ask for:

• EU CE Category II — Notified Body number, certificate number, expiry date
• EN 388 / EN ISO 374-5 compliance ratings
• REACH SVHC test report from an accredited lab, with a report number

A supplier who can’t produce these on request is worth a second look before a large order.

3. Confirm OEM Terms and Request Samples

Clarify what’s customizable (color, logo printing, packaging) versus standard process, and get artwork and packaging requirements agreed in writing. Always request samples before bulk production — check size, grip, comfort, and whether they match the written spec, not just the general look. Confirm any changes in writing before production starts.

4. Get Packaging and Container Numbers by Model

Ask for container loading figures specific to the weight you’re ordering — lighter gloves load very differently than heavier ones:

• JLHL-35G (35g): 240,000 pairs / 20GP
• JLHL-50G (50g): 192,000 pairs / 20GP
• JLHL-65G (65g): 156,000 pairs / 20GP

A supplier who gives you this breakdown by model, not one flat number, has their production data in order.

Case Study: Jiali’s Flock-Lined & Dipped-Lined Household Gloves

• Factory: Jiali, direct manufacturer, est. 1998
• Material: 100% Natural Rubber Latex, cotton flock or dipped lining
• CE Certification: Category II, Notified Body 0075 (CTC France), Cert No. 0075/2236/162/04/21/0798, valid to May 3, 2031
• REACH: TÜV SÜD Report No. 7216010276, passing all 251 SVHC substances
• Range: 23g–65g, palm thickness 5.5–15.0 mil, length 29–32 cm
• MOQ: 1 × 20GP container, with private-label and custom color support

FAQ

What weight should I order? 23–35g for light dishwashing; 50–65g for heavier facility or industrial-adjacent cleaning.

What certifications matter most for EU buyers? CE Category II with a valid certificate number, plus a REACH SVHC report — ask for both before ordering.

What’s a typical MOQ? Usually one 20GP container, which can range from roughly 144,000 to 324,000 pairs depending on the gauge ordered.

Work with Jiali Gloves

Zhanjiang Jiali Glove Products Co., Ltd. has manufactured gloves since 1998, operating 9 automated dipping lines with 180M+ pairs annual output, supplying buyers across Europe, North America, the Middle East and Southeast Asia. Learn more · View products · Contact us

Zhanjiang Jiali Glove Products Co., Ltd. participated in the 2026 Spring Canton Fair in Guangzhou, China. The event gave our team an opportunity to meet international buyers, introduce our manufacturing capabilities and discuss practical glove sourcing requirements with partners from different markets.

Founded in 1998, Jiali Gloves is a direct manufacturer with a 57,000 m² production facility and 9 automated production lines. We support overseas buyers with glove manufacturing, OEM/ODM service, product customization and export-oriented quality control.

Meet Jiali Gloves at the 2026 Spring Canton Fair

Jiali Gloves welcomes international buyers, distributors, brand owners and purchasing professionals to visit our booths at the China Import and Export Fair Complex in Pazhou, Guangzhou.

• Phase 1: April 15–19, 2026 — Booth 10.1K21
• Phase 2: April 23–27, 2026 — Booth 14.4C06
• Venue: China Import and Export Fair Complex, Pazhou, Guangzhou, China

Glove Products and OEM/ODM Services Presented

At the fair, Jiali Gloves presented protective glove solutions for household and disposable latex applications. Buyers could discuss product specifications, packaging options, logo customization, sampling arrangements and factory-direct supply for their own markets.

• Household latex gloves
• Disposable latex examination gloves
• Custom colors, logo printing and packaging
• OEM/ODM support for overseas brands and distributors

From Exhibition Meeting to Factory Cooperation

For buyers, a trade fair meeting is the first step toward evaluating a long-term supplier. Jiali Gloves supports follow-up communication with product specifications, sample arrangements, OEM/ODM discussions and factory information. Our goal is to help buyers assess whether our manufacturing capabilities match their product and supply-chain requirements.

Learn more about Jiali Gloves as a manufacturer, review our quality system and certifications, or contact our sales team for a factory quotation.